Methyl 4-hydroxy-5-nitro-m-anisate
Methyl 4-hydroxy-3-methoxy-5-nitrobenzenecarboxylate
CAS: 42590-00-1
Molecular Formula: C9H9NO6
Methyl 4-hydroxy-5-nitro-m-anisate - Names and Identifiers
Methyl 4-hydroxy-5-nitro-m-anisate - Physico-chemical Properties
| Molecular Formula | C9H9NO6 |
| Molar Mass | 227.18 |
| Density | 1.405±0.06 g/cm3(Predicted) |
| Melting Point | 154-155 °C |
| Boling Point | 354.1±37.0 °C(Predicted) |
| pKa | 5.36±0.38(Predicted) |
| Storage Condition | Sealed in dry,Room Temperature |
| Sensitive | Irritant |
| MDL | MFCD06203667 |
Methyl 4-hydroxy-5-nitro-m-anisate - Risk and Safety
| Hazard Class | IRRITANT |
Methyl 4-hydroxy-5-nitro-m-anisate - Upstream Downstream Industry
Methyl 4-hydroxy-5-nitro-m-anisate - Introduction
Methyl is an organic compound with the chemical formula C9H9NO6. The following is a detailed description of the properties, uses, preparation and safety information of the substance:
Nature:
-Appearance: Colorless to slightly yellow crystalline powder.
-Melting point: Approximately 99-100°C.
-Boiling point: About 305 ℃.
-Solubility: Soluble in ether, chlorinated methane and alcohol solvents, slightly soluble in water.
Use:
- Methyl L can be used as a pharmaceutical intermediate and a starting material for organic synthesis.
-It is also used in pesticide synthesis.
Method:
-This compound can be obtained by the nitration of methyl p-hydroxybenzoate. First, methyl p-hydroxybenzoate was dissolved in sulfuric acid and then nitric acid was added slowly. As the reaction proceeds, the reaction system turns red. After the reaction is completed, sulfuric acid and other substances in the reaction solution are removed to obtain Methyl.
Safety Information:
- Methyl L is an organic compound and should be handled with care to avoid inhalation, ingestion or contact with skin and eyes.
-Wear personal protective equipment such as lab gloves, safety glasses, etc. when handling the substance.
-When using or storing the substance, keep it away from ignition and oxidizing agents to avoid fire or explosion.
-If the substance is accidentally inhaled or ingested, seek medical attention immediately and go to the doctor with the container or label for diagnosis and treatment.
-For specific toxicity and health effects of this compound, it is recommended to refer to the relevant safety data sheets and chemical handling guidelines.
Please note that for any specific situation where the compound is to be used, it is recommended that it be carried out in a laboratory or professional environment and follow the appropriate safe operating procedures.
Nature:
-Appearance: Colorless to slightly yellow crystalline powder.
-Melting point: Approximately 99-100°C.
-Boiling point: About 305 ℃.
-Solubility: Soluble in ether, chlorinated methane and alcohol solvents, slightly soluble in water.
Use:
- Methyl L can be used as a pharmaceutical intermediate and a starting material for organic synthesis.
-It is also used in pesticide synthesis.
Method:
-This compound can be obtained by the nitration of methyl p-hydroxybenzoate. First, methyl p-hydroxybenzoate was dissolved in sulfuric acid and then nitric acid was added slowly. As the reaction proceeds, the reaction system turns red. After the reaction is completed, sulfuric acid and other substances in the reaction solution are removed to obtain Methyl.
Safety Information:
- Methyl L is an organic compound and should be handled with care to avoid inhalation, ingestion or contact with skin and eyes.
-Wear personal protective equipment such as lab gloves, safety glasses, etc. when handling the substance.
-When using or storing the substance, keep it away from ignition and oxidizing agents to avoid fire or explosion.
-If the substance is accidentally inhaled or ingested, seek medical attention immediately and go to the doctor with the container or label for diagnosis and treatment.
-For specific toxicity and health effects of this compound, it is recommended to refer to the relevant safety data sheets and chemical handling guidelines.
Please note that for any specific situation where the compound is to be used, it is recommended that it be carried out in a laboratory or professional environment and follow the appropriate safe operating procedures.
Last Update：2024-04-09 21:01:54
Supplier List
View History
Downstream Products for Methyl 4-hydroxy-5-nitro-m-anisate